After years of solid and rapid development, SHSUOTE Valve has grown into one of the most professional and influential enterprises in China. automatic control valve manufacturer We promise that we provide every customer with high-quality products including automatic control valve manufacturer and comprehensive services. If you want to know more details, we are glad to tell you. is devoted to enhancing its manufacturing capabilities by continuously adopting advanced foreign manufacturing practices and processing technology. We have invested in state-of-the-art production equipment and quality inspection tools, allowing us to produce automatic control valve manufacturer that outclass our competitors in terms of performance stability, reliability, durability, and cost-effectiveness. This gives us an upper hand in the market, making us more competitive and highly sought after by customers.
The ModeI S900-1 is the basic valve used in nearly all shsuoTe Automatic control valves. lt is the valve of choice for system applications requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control or check valve peration. The rugged simplicity of design and packless construction assure a long life of dependable, trouble-free peration. lt is available in various materials and in a full range of sizes , with either threaded, fIanged or grooved ends. lts applications are unlimited.
Full open operation when pressure in the cover chamber is relieved to a zone of lower pressure, the line pressure at the valve inlet opens the valve, allowing full flow.
Tight closing operation when pressure from the valve inlet is applied to the cover chamber, the vaIve closes drip-tight.
Modulating Action: The vaIve holds any intermediate position when operating pressures are equal above and below the diaphragm. Shsuote "Modulating" pilot control will allow the vaIve to automatically compensate for line pressure changes.
Available Size
| Pattern | Threaded | Flanged | Grooved End |
| Globe | 10 - 80 mm | 40 - 900 mm | 40 - 50 - 65 - 80 - 100 150 - 200 mm |
| Angle | 25 - 80 mm | 40 - 400 & 600 mm | 40 - 50 - 65 - 80 100 - 150 mm |
Pressure Rating(Recommended Maximum pressure - psi)
| Valve body ＆ cover | Pressure class |
| Flanged | Grooved | Threaded |
| Grade | Material | ANSI standards＊ | 150 class
| 300 class | 300 class | End Details |
| ASTM A536 | Ductile Iron | B16 . 42 | 250 | 400
| 400 | 400 |
| ASTM A21 6-WCB | Cast steeI | B16 . 5 | 285
| 400 | 400 | 400 |
| UNS 87850 | Bronze | B16 . 24 | 225 | 400 | 400 | 400 |
Note: ＊ANSI Standards are for f ange dimensions only. Flanged valves are available faced but not drilled. End Details machined to ANSI B2.1 specifications. Valves for higher pressure are available consult factory for more detail. |
Materials
| Component | Standard Material Combinations
|
| Body & cover | Ductile Iron | Cast steel | Bronze |
| Available sizes | 10 - 990 mm | 25 - 400 mm | 25 - 400 mm |
| Disc Retainer & Diaphragm washer | Cast iron | Cast steel | Bronze |
Trim: Disc Guide Seat & Cover Bearing | Bronze is standard Stainless steel is optional |
| Disc | Buna-N® Rubber |
| Diaphragm | NY on Renforced Buna-N® Rubber |
| Stem, Nut & Spring | Stainless steel |
For material options not listed, consult factory. Shsuote manufactures valves in more than 50 different alloys. |
Viton® Rubber parts - suffix KB
Optional diaphragm , disc and o-ring fabricated with Viton® synthetic rubber. Viton® is well suited for use with mineral acids, salt solutions , chlorinated hydrocarbons, andpetroleum oils and is primarily used in high temperature applications up to 120°C. Do not use with epoxy coatings above 80° C.
Dura-KIeen® stem - suffix KD
This stem is designed for applications where water supplies containing dissolved minerals create deposits that build-up on a standard stem and hamper valve pera-tion. A Patented, self-cleaning design on the stem allows all valve sizes to operate freeIy in the harshest conditions.
Heavy spring - suff XKH
The heavy spring ption is used in applications where there is low differential pressure across the valve, and the additional spring force is needed to help the vaIve close. This option is best suited for valves used in on-off (non-modulating) service.
Epoxy Coating suffix KC
The NSF/ANSI 61 fusion bonded epoxy coating ption is for use with cast iron, ductie iron or steel vaIves. This coating is resistant to various water conditions, certain acids, chemicals, solvents and alkalies. Epoxy atings are applied in accor-dance with AWWA coating specifications C116-03.
Do not use with temperatures above 80°C.
Delrin® Sleeved Stem - suffix KG
The Delrin® sleeved stem is designed for applications where water supplies contain dissolved minerals which can form deposits that build up on the valve stem and hamper vaIve peration. ScaIe build-up will not adhere to the Delrin® sleeve stem. Delrin® sleeved stems are not recommended for valves in continuous operation where differential pressures are in excess of 80psi (50 mm and larger Hytrol vaIves).
water Treatment clearance suffix KW
This additional clearance is beneficial in applications where water treatment compounds can interfere with the closing of the valve. The smaller outside diameter disc guide provides more clearance between the disc guide and the vaIve seat. This
option is best suited for valves used in on-off (non-modulating) service.
Anti-cavitation Trim - suffix KO
Anti-cavitation Trim components consist of a stainless steel radia lsotted disc guide and seat. This system is used when high differentials are present across the vaIve.
For assistance in selecting appropriate valve options or valves manufactured with special design requirements, please contact our Regional sales office or Factory!
Structural composition and parameters:
| NO. | Part Name | Materid | Standard |
| 1 | Body | Ductlie Iron | GJS 500-7 |
| 2 | Seat | Stainless Steel | AISI 304/316 |
| 3 | 0-ring | Rubber | NBR |
| 4 | 0-ring | Rubber | NBR |
| 5 | Balt | Stainless Steel | A2/A4 |
6
| Washer | Stainless Steel | A2/A4 |
| 7 | Bonnet | Ductlie Iron | GJS 500-7 |
| 8 | Bush | Bronze | C61900 |
| 9 | Spring | Stainless Steel | AISI 304/316 |
| 10 | Caulking Nuf | Stainless Steel | A4 |
| 11 | Diaphragm | Nylon Reinforced Rubber | EPDM+Nylon Fabric |
| 12 | Fixing holder | Ductlie Iron | GJS 500-7 |
| 13 | Disc Holder | Ductlie Iron | GJS 500-7 |
| 14 | Sed | Rubber | EPDM |
| 15 | Seat Retainer | Stainless Steel | AISI 304/316 |
| 16 | Stem | Stainless Steel | AISI 304/316 |
17
| Plug | Stainless Steel | AISI 304/316 |
| 18 | Screw | Stainless Steel | A2/A4 |
| 19 | Plug | Stainless Steel | A2/A4 |
| 20 | Washer | Stainless Steel | A2/A4 |
| NPS | L | DN | ØD | ØK | N-Ød | C | H |
| 2" | 230 | 50 | 152 | 120.6 | 4-Ø19 | 19 | 177 |
| 2 1/2" | 290 | 65 | 178 | 139.7 | 4-Ø19 | 22.1 | 202 |
| 3" | 310 | 80
| 190 | 152.4 | 4-Ø19 | 23.9 | 219 |
| 4" | 350 | 100 | 229 | 190.5 | 8-Ø19 | 23.9 | 243 |
| 5" | 400 | 125 | 254 | 215.9 | 8-Ø22.5 | 23.9 | 243 |
| 6" | 480 | 150 | 279 | 241.3 | 8-Ø22.5 | 25.4 | 333 |
| 8" | 600 | 200 | 343 | 298.4 | 8-Ø22.5 | 28.4 | 428 |
| 10" | 730 | 250 | 406 | 362 | 12-Ø26 | 29.9 | 478 |
| 12" | 850
| 300 | 484 | 431.8 | 12-Ø26 | 31.7 | 538 |
| 14" | 980 | 350 | 533 | 476.2 | 12-Ø28.5 | 34.8 | 550 |
*Estimated
Note:
1. Test:
1.1 Sealing test
Low pressure: 0.5ba;
High pressure:1 1xPN bar;
1.2 Shell test
15xPN bar
2. Flange dimension can be according to order;
3. If need optional material or others consult factory.
Technical Specification
1. Design & Manufacture: BS EN 1074-5
2. Face to Face Standard: BS EN 558-1
3. Range ends Standard: ASME B16.5
4. Test inspection: BS EN 12266-1
Unit:mm
| NPS | L | DN | ΦD | ΦK | N-Φd | C | H |
| 2” | 230 | 50 | 152 | 120.6 | 4-Φ19 | 19 | 177 |
| 21/2” | 290 | 65 | 178 | 139.7 | 4-Φ19 | 22.1 | 202 |
| 3” | 310 | 80 | 190 | 152.4 | 4-Φ19 | 23.9 | 219 |
| 4” | 350 | 100 | 229 | 190.5 | 8-Φ19 | 23.9 | 243 |
| 5” | 400 | 125 | 254 | 215.9 | 8-Φ22.5 | 23.9 | 243 |
| 6” | 480 | 150 | 279 | 241.3 | 8-Φ22.5 | 25.4 | 333 |
| 8” | 600 | 200 | 343 | 298.4 | 8-Φ22.5 | 28.4 | 428 |
| 10” | 730 | 250 | 406 | 362 | 12-Φ26 | 29.9 | 478 |
| 12” | 850 | 300 | 484 | 431.8 | 12-Φ26 | 31.7 | 538 |
| 14” | 980 | 350 | 533 | 476.2 | 12-Φ28.5 | 34.8 | 550 |
| No | Part Name | Material | Standard |
| 1 | Body | Ductlie lron | GJS 500-7 |
| 2 | Seat | Stainless Steel | AlSI 304/316 |
| 3 | O-ring | Rubber | NBR |
| 4 | 0-ring | Rubber | NBR |
| 5 | Bolt | Stainless Steel | A2/A4 |
| 6 | Washer | Stainless Steel | A2/A4 |
| 7 | Bonnet | Ductile lron | GJS 500-7 |
| 8 | Bush | Bronze | C61900 |
| 9 | Spring | Stainless Steel | AISI 304/316 |
| 10 | Caulking Nut | Stainless Steel | A4 |
| 11 | Diaphragm | Nylon Reinforced Rubber | EPDM +Nylon Fabric |
| 12 | Fixing holder | Ductlie lron | GJS 500-7 |
| 13 | Disc Holder | Ductlie lron | GJS 500-7 |
| 14 | Sed | Rubber | EPDM |
| 15 | Seat Refainer | Stainless Steel | AISI 304/316 |
| 16 | Stem | Stainless Steel | AISI 304/316 |
| 17 | Plug | Stainless Steel | AISI 304/316 |
| 18 | Screw | Stainless Steel | A2/A4 |
| 19 | Plug | Stainless Steel | A2/A4 |
| 20 | Washer | Stainless Steel | A2/A4 |
| Main Valve Globe type Fully bore Flange 2~14” | SE-SUOTE-BS-S900-2-14-CL150-V1 |
| Shang hai SHUOTE Valve Co.,Ltd. | 2023.5.16 |
Note:
1. Test:
1.1 Sealing test
Low pressure:0.5bar;
High pressure:1.1xPN bar;
1.2 Shell test
1.5xPN bar
2. Flange dimension can be according to order;
3. lf need optional material or others consult factory.
Technical Specification
1. Design & Manufacture: BS EN 1074-5
2. Face to Face Standard: BS EN 558-1
3. Flange ends Standard: IS07005-2
4. Test Inspection: BS EN 12266-1
Unit:mm
| DN | L | H | ΦD | ΦK | N-Φd | ΦB | C | f |
| PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 |
| 50 | 230 | 177 | 165 | 165 | 165 | 125 | 125 | 125 | 4-Φ19 | 4-Φ19 | 4-Φ19 | 99 | 99 | 99 | 19 | 19 | 19 | 3 | 3 | 3 |
| 65 | 290 | 202 | 185 | 185 | 185 | 145 | 145 | 145 | 4-Φ19 | 4-Φ19 | 8-Φ19 | 118 | 118 | 118 | 19 | 19 | 19 | 3 | 3 | 3 |
| 80 | 310 | 219 | 200 | 200 | 200 | 160 | 160 | 160 | 8-Φ19 | 8-の19 | 8-Φ19 | 132 | 132 | 132 | 19 | 19 | 19 | 3 | 3 | 3 |
| 100 | 350 | 243 | 220 | 220 | 235 | 180 | 180 | 190 | 8-Φ19 | 8-Φ19 | 8-Φ23 | 156 | 156 | 156 | 19 | 19 | 19 | 3 | 3 | 3 |
| 125 | 400 | 243 | 250 | 250 | 270 | 210 | 210 | 220 | 8-Φ19 | 8-Φ19 | 8-Φ28 | 184 | 184 | 184 | 19 | 19 | 19 | 3 | 3 | 3 |
| 150 | 480 | 333 | 285 | 285 | 300 | 240 | 240 | 250 | 8-Φ23 | 8-Φ23 | 8-Φ28 | 211 | 211 | 211 | 19 | 19 | 20 | 3 | 3 | 3 |
| 200 | 600 | 428 | 340 | 340 | 360 | 295 | 295 | 310 | 8-Φ23 | 12-Φ23 | 12-Φ28 | 266 | 266 | 274 | 20 | 20 | 22 | 3 | 3 | 3 |
| 250 | 730 | 478 | 395 | 405 | 425 | 350 | 355 | 370 | 12-Φ23 | 12-Φ28 | 12-Φ31 | 319 | 319 | 330 | 22 | 22 | 24.5 | 3 | 3 | 3 |
| 300 | 850 | 538 | 445 | 460 | 485 | 400 | 410 | 430 | 12-Φ23 | 12-Φ28 | 16-Φ31 | 370 | 370 | 389 | 24.5 | 24.5 | 27.5 | 4 | 4 | 4 |
| 350 | 980 | 550 | 505 | 520 | 555 | 460 | 470 | 490 | 16-Φ23 | 16-Φ28 | 16-034 | 429 | 429 | 448 | 24.5 | 26.5 | 30 | 4 | 4 | 4 |
| No. | Part Name | Material | Standard |
| 1 | Body | Ductlie lron | GJS 500-7 |
| 2 | Seat | Stainless Steel | AISI 304/316 |
| 3 | 0-rino | Rubber | NBR |
| 4 | O-ring | Rubber | NBR |
| 5 | Bolt | Stainless Steel | A2/A4 |
| 6 | Washer | Stainless Steel | A2/A4 |
| 7 | Bonnet | Ductite lron | GJS 500-7 |
| 8 | Bush | Bronze | C61900 |
| 9 | Spring | Stainless Steel | AISI 304/316 |
10
| Caulking Nut | Stainless Steel | A4 |
| 11 | Diaphragm | Nylon Reinforced Rubber | FPDM +Nylon Fabric |
| 12 | Fixing holder | Ductlie lron | GJS 500-7 |
| 13 | Disc Holder | Ductlie lron | GJS 500-7 |
| 14 | Seal | Rubber | EPDM |
| 15 | Seat Retainer | Stainless Steel | AlSI 304/316 |
| 16 | Stem | Stainless Steel | AlSI 304/316 |
| 17 | Plug | Stainless Steel | AISI 304/316 |
| 18 | Screw | Stainless Steel | A2/A4 |
| 19 | Plug | Stainless Steel | A2/A4 |
| 20 | Washer | Stainless Steel | A2/A4 |
| Main Valve Globe type Fully bore Flange DN50-350 | SE-AFC-BS-A900-50-350-10-V1 |
| Shang hai SHUOTE Valve Co,Ltd | 2022 |
Technical Specification
1.Design & Manufacture: BS EN 1074-5
2. Fce to Face Standard: BS EN 558-1
3. Flange ends Standard: IS07005-2
4.Test Inspection: BS EN 12266-1
Note:
1. Test:
1.1 Sealing test
Low pressure:0.Sbar;
High pressure:1.1xPN bar;
1.2 Shell test
1.5xPN bar
2. Flange dimension can be according to order;
3. lf need optional material or others consult factory.
Unit:mm
| DN | L | H | ΦD | ΦK | N-Φd | ΦB | C | f |
| PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 | PN10 | PN16 | PN25 |
| 400 | 1100 | 710 | 565 | 580 | 620 | 515 | 525 | 550 | 16-Φ28 | 16-Φ31 | 16-Φ37 | 480 | 480 | 503 | 24.5 | 28 | 32 | 4 | 4 | 4 |
| 450 | 1200 | 720 | 615 | 640 | 670 | 565 | 585 | 600 | 20-Φ28 | 20-Φ31 | 20-Φ37 | 530 | 548 | 548 | 25.5 | 30 | 34.5 | 4 | 4 | 4 |
| 500 | 1250 | 822 | 670 | 715 | 730 | 620 | 650 | 660 | 20-Φ28 | 20-Φ34 | 20-Φ37 | 582 | 609 | 609 | 26.5 | 31.5 | 36.5 | 4 | 4 | 4 |
| 600 | 1450 | 885 | 780 | 840 | 845 | 725 | 770 | 770 | 20-Φ31 | 20-Φ37 | 20-Φ40 | 682 | 720 | 720 | 30 | 36 | 42 | 5 | 5 | 5 |
| 700 | 1650 | 910 | 895 | 910 | 960 | 840 | 840 | 875 | 24-Φ31 | 24-Φ37 | 24-043 | 794 | 794 | 820 | 32.5 | 39.5 | 46.5 | 5 | 5 | 5 |
| 800 | 1850 | 1260 | 1015 | 1025 | 1085 | 950 | 950 | 990 | 24-Φ34 | 24-Φ40 | 24-049 | 901 | 901 | 928 | 35 | 43 | 51 | 5 | 5 | 5 |
| 900 | 2050 | 1260 | 1115 | 1125 | 1185 | 1050 | 1050 | 1090 | 28-Φ34 | 28-Φ40 | 28-Φ49 | 1001 | 1001 | 1028 | 37.5 | 46.5 | 55.5 | 5 | 5 | 5 |
| 1000 | 2250 | 1260 | 1230 | 1255 | 1320 | 1160 | 1170 | 1210 | 28-Φ37 | 28-Φ42 | 28-Φ56 | 1112 | 1112 | 1140 | 40 | 50 | 60 | 5 | 5 | 5 |
| 1200 | 2350 | 1630 | 1455 | 1485 | 1530 | 1380 | 1390 | 1420 | 32-Φ40 | 32-Φ49 | 32-Φ56 | 1328 | 1328 | 1350 | 45 | 57 | 69 | 5 | 5 | 5 |
| No | Part Name | Material | Standard |
| 1 | Body | Ductlie lron | GJS 500-7 |
| 2 | Seat | Stainless Steel | AISI 304/316 |
| 3 | Screw | Stainless Steel | A2/A4 |
| 4 | Screw | Stainless Steel | A2/A4 |
| 5 | Screw | Stainless Steel | A2/A4 |
| 6 | Spring | Stainless Steel | AISI 304/316 |
| 7 | Bonnet | Ductile Iror | GJS 500-7 |
| 8 | Bush | Bronze | C61900 |
| 9 | 0-rinc | Rubber | NBR |
| 10 | Fix Washer | Bronze | C61900 |
| 11 | Diaphragm | Nylon Reinforced Rubber | EPDM +Nylon Fabric |
| 12 | Eye Bolts | Carbon Steel | 1040 |
| 13 | Fixing Holder | Ductlie Iron | GJS 500-7 |
| 14 | Disc Holder | Ductlie Iron | GJS 500-7 |
| 15 | Sed | Rubber | EPDM |
| 16 | Sedl Retainer | Ductile Iron | GJS 500-7 |
| 17 | Stem | Stainless Steel | AISI 304/316 |
| 18 | Plug | Stainless Steel | AISI 304/316 |
| 19 | 0-rinc | Rubber | NBR |
| 20 | Cap | Ductlie lron | GJS 500-7 |
| 21 | Plug | Stainless Steel | AISI 304/316 |
| 22 | Screw | Stainless Steel | A2/A4 |
| 23 | O-ring | Rubber | NBR |
| 24 | Screw | Stainless Steel | A2/A4 |
| Main Valve Globe type Fully bore Flange DN40O-1200 | SE-AFC-BS-A900-400-1200-10-V1 |
| Shang hai SHUOTE Valve Co,Ltd | 2022 |
