SHSUOTE Valve - Leading industrial valve manufacturer and supplier since 2004

Language
PRODUCTS
HOME > PRODUCTS
VR
Recommended
Replay
Replay
Recommended
Quality Customized Hytrol valve S900-1 | SHSUOTE Valve
Quality Customized Hytrol valve S900-1 | SHSUOTE Valve
Simple reliable and accurate hytrol valve S900-01(DN600-DN1400) | SHSUOTE Valve
Simple reliable and accurate hytrol valve S900-01(DN600-DN1400) | SHSUOTE Valve
Anti-cavitation Hytrol Valve S900-01KO (Full internal port)
Anti-cavitation Hytrol Valve S900-01KO (Full internal port)
Powertrol valve S900-02 | SHSUOTE Valve
Powertrol valve S900-02 | SHSUOTE Valve
Customized Hytrol valve S900 | SHSUOTE Valve

Customized Hytrol valve S900 | SHSUOTE Valve

S900 Hytrol valve compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.SHSUOTE Valve summarizes the defects of past products, and continuously improves them. The specifications of S900 Hytrol valve can be customized according to your needs.

The SHSUOTE model S900 hytrol vaIve is a hydraulically operated,  diaphragm actuated, globe or angle pattern vaIve. lt consists of three   major components: body, diaphragm assembly, and cover. The diaphragm assembly is the only moving part.

The diaphragm assembly is guided top and bottom by a precision machined stem. lt utilizes a non-wicking diaphragm of nylon fabric bonded with synthetic rubber. A resilient synthetic rubber disc retained on three and one half sides by a disc retainerforms a drip-tight seal with the renewable seat when pressure is applied above the diaphragm.


· Drip-Tight, positive seating

· Service without Removal From Line

· Threaded, Flanged or Grooved Ends

· GIobe or AngIe pattern

· 100% Factory Tested

SEND INQUIRY NOW
SEND INQUIRY NOW
  • Product Details

The model S900 is the basic valve used in nearly all SHSUOTE automatic control valves. lt is the vaIve of choice for system applications requiring remote control, pressure regulation, solenoid peration, rate of flow control, liquid level control or check vaIve peration. The rugged simplicity of design and packless construction assure a long life of dependable, trouble free peration. lt is availabIe in various materials and  in a full range of sizes, with either threaded, flanged or grooved ends. Its applications are unlimited.


Full Open Operation

when pressure in the cover chamber is relieved to a zone of lower pres-

sure, the line pressure at the valve inlet opens the vaIve, allowing full flow.

Tight Closing Operation

When pressure from the valve inlet is applied to the cover chamber, the vaIve closes drip-tight.

Modulating Action

The vaIve holds any intermediate position when operating pressures are equal above and below the diaphragm. A SHSUOTE " ModuIating"

pilot control will allow the valve to automatically compensate for line

pressure changes.


Materia list of all parts of main valve




DNLHH1*ΦKS
40230139851733/8"
50230139851733/8"
65230159951983/8"
1003502141122651/2"
125
4002781273071/2"
1504803331453511/2"
2006004071724363/4"
2507304762055241"
3008505262326061"
3509805852626731"
40011006242927411"
500125072036010021"
600145083542513081"
800185011105151755
1"
10002250135063022311"
            

DNLHH1*ΦKS
65
290139951373/8"
803101591021983/8"
1003501791122263/8"
1254002141272651/2"
1504802141452651/2"
2006003331723511/2"
2507304072054363/4"
3008503762325241"
3509805262626061"
40011005262926061"
45012006243257411"
50012506243607411"
600145072042510021"
700
165083546013081"
800185083551513081"
9002050111057017551"
10002250111063017551"
1200
2450135075022311"
    
NO.Part NameMateridStandard
1

Body

Ductlie IronGJS 500-7
2SeatStainless SteelAISI 304/316
30-ringRubberNBR
40-ringRubberNBR
5BaltStainless SteelA2/A4
6
WasherStainless SteelA2/A4
7BonnetDuctlie IronGJS 500-7
8BushBronzeC61900
9SpringStainless SteelAISI 304/316
10Caulking NufStainless SteelA4
11DiaphragmNylon Reinforced RubberEPDM+Nylon Fabric
12Fixing holderDuctlie IronGJS 500-7
13Disc HolderDuctlie IronGJS 500-7
14SedRubberEPDM
15Seat RetainerStainless SteelAISI 304/316
16StemStainless SteelAISI 304/316
17
PlugStainless SteelAISI 304/316
18ScrewStainless SteelA2/A4
19PlugStainless SteelA2/A4
20WasherStainless SteelA2/A4






NO.Part NameMateridStandard
1

Body

Ductlie IronGJS 500-7
2SeatStainless SteelAISI 304/316
30-ringRubberNBR
40-ringRubberNBR
5BaltStainless SteelA2/A4
6
WasherStainless SteelA2/A4
7BonnetDuctlie IronGJS 500-7
8BushBronzeC61900
9SpringStainless SteelAISI 304/316
10Caulking NufStainless SteelA4
11DiaphragmNylon Reinforced RubberEPDM+Nylon Fabric
12Fixing holderDuctlie IronGJS 500-7
13Disc HolderDuctlie IronGJS 500-7
14SedRubberEPDM
15Seat RetainerStainless SteelAISI 304/316
16StemStainless SteelAISI 304/316
17
PlugStainless SteelAISI 304/316
18ScrewStainless SteelA2/A4
19PlugStainless SteelA2/A4
20WasherStainless SteelA2/A4


American Standard


Note:

1. Test:

1.1 Sealing test

Low pressure: 0.5ba;

High pressure:1 1xPN bar;

1.2 Shell test


15xPN bar

2. Flange dimension can be according to order;

3. If need optional material or others consult factory.


Technical Specification

1. Design & Manufacture: BS EN 1074-5

2. Face to Face Standard: BS EN 558-1

3. Range ends Standard: ASME B16.5

4. Test inspection: BS EN 12266-1

Unit:mm

NPSLDNΦDΦKN-ΦdCH
2”23050152120.64-Φ1919177
21/2”29065178139.74-Φ1922.1202
3”31080190152.44-Φ1923.9219
4”350100229190.58-Φ1923.9243
5”400125254215.98-Φ22.523.9243
6”480150279241.38-Φ22.525.4333
8”600200343298.48-Φ22.528.4428
10”73025040636212-Φ2629.9478
12”850300484431.812-Φ2631.7538
14”980350533476.212-Φ28.534.8550


NoPart NameMaterialStandard
1BodyDuctlie lronGJS 500-7
2SeatStainless SteelAlSI 304/316
3O-ringRubberNBR
40-ringRubberNBR
5BoltStainless SteelA2/A4
6WasherStainless SteelA2/A4
7BonnetDuctile lronGJS 500-7
8BushBronzeC61900
9SpringStainless SteelAISI 304/316
10Caulking NutStainless SteelA4
11DiaphragmNylon Reinforced RubberEPDM +Nylon Fabric
12Fixing holderDuctlie lronGJS 500-7
13Disc HolderDuctlie lronGJS 500-7
14SedRubberEPDM
15Seat RefainerStainless SteelAISI 304/316
16StemStainless SteelAISI 304/316
17PlugStainless SteelAISI 304/316
18ScrewStainless SteelA2/A4
19PlugStainless SteelA2/A4
20WasherStainless SteelA2/A4


Main Valve Globe type Fully bore Flange 2~14”SE-SUOTE-BS-S900-2-14-CL150-V1
Shang hai SHUOTE Valve Co.,Ltd.2023.5.16


European standard


Note:


1. Test:

1.1 Sealing test

Low pressure:0.5bar;

High pressure:1.1xPN bar;

1.2 Shell test

1.5xPN bar

2. Flange dimension can be according to order;

3. lf need optional material or others consult factory.



Technical Specification

1. Design & Manufacture: BS EN 1074-5

2. Face to Face Standard: BS EN 558-1

3. Flange ends Standard: IS07005-2

4. Test Inspection: BS EN 12266-1

Unit:mm

DNLHΦDΦKN-ΦdΦBCf
PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25
502301771651651651251251254-Φ194-Φ194-Φ19999999191919333
652902021851851851451451454-Φ194-Φ198-Φ19118118118191919333
803102192002002001601601608-Φ198-の198-Φ19132132132191919333
1003502432202202351801801908-Φ198-Φ198-Φ23156156156191919333
1254002432502502702102102208-Φ198-Φ198-Φ28184184184191919333
1504803332852853002402402508-Φ238-Φ238-Φ28211211211191920333
2006004283403403602952953108-Φ2312-Φ2312-Φ28266266274202022333
25073047839540542535035537012-Φ2312-Φ2812-Φ31319319330222224.5333
30085053844546048540041043012-Φ2312-Φ2816-Φ3137037038924.524.527.5444
35098055050552055546047049016-Φ2316-Φ2816-03442942944824.526.530444


No.Part NameMaterialStandard
1BodyDuctlie lronGJS 500-7
2SeatStainless SteelAISI 304/316
30-rinoRubberNBR
4O-ringRubberNBR
5BoltStainless SteelA2/A4
6WasherStainless SteelA2/A4
7BonnetDuctite lronGJS 500-7
8BushBronzeC61900
9SpringStainless SteelAISI 304/316
10
Caulking NutStainless SteelA4
11DiaphragmNylon Reinforced RubberFPDM +Nylon Fabric
12Fixing holderDuctlie lronGJS 500-7
13Disc HolderDuctlie lronGJS 500-7
14SealRubberEPDM
15Seat RetainerStainless SteelAlSI 304/316
16StemStainless SteelAlSI 304/316
17PlugStainless SteelAISI 304/316
18ScrewStainless SteelA2/A4
19PlugStainless SteelA2/A4
20WasherStainless SteelA2/A4


Main Valve Globe type Fully bore Flange DN50-350SE-AFC-BS-A900-50-350-10-V1
Shang hai SHUOTE Valve Co,Ltd2022


Technical Specification

1.Design & Manufacture: BS EN 1074-5

2. Fce to Face Standard: BS EN 558-1

3. Flange ends Standard: IS07005-2

4.Test Inspection: BS EN 12266-1


Note:

1. Test:

1.1 Sealing test

Low pressure:0.Sbar;

High pressure:1.1xPN bar;

1.2 Shell test

1.5xPN bar

2. Flange dimension can be according to order;

3. lf need optional material or others consult factory.

Unit:mm

 DN LHΦDΦKN-ΦdΦBCf
PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25
4001100710565 58062051552555016-Φ2816-Φ3116-Φ3748048050324.52832444
4501200720615 64067056558560020-Φ2820-Φ3120-Φ3753054854825.53034.5444
5001250822670 71573062065066020-Φ2820-Φ3420-Φ3758260960926.531.536.5444
600145088578084084572577077020-Φ3120-Φ3720-Φ40682720720303642555
700165091089591096084084087524-Φ3124-Φ3724-04379479482032.539.546.5555
8001850126010151025108595095099024-Φ3424-Φ4024-049901901928354351555
9002050126011151125118510501050109028-Φ3428-Φ4028-Φ4910011001102837.546.555.5555
10002250126012301255132011601170121028-Φ3728-Φ4228-Φ56111211121140405060555
12002350163014551485153013801390142032-Φ4032-Φ4932-Φ56132813281350455769555


NoPart NameMaterialStandard
1 BodyDuctlie lronGJS 500-7
2SeatStainless SteelAISI 304/316
3 ScrewStainless SteelA2/A4
4 ScrewStainless SteelA2/A4
5 ScrewStainless SteelA2/A4
6 SpringStainless SteelAISI 304/316
7 BonnetDuctile IrorGJS 500-7
8 BushBronzeC61900
9 0-rincRubberNBR
10Fix WasherBronzeC61900
11DiaphragmNylon Reinforced RubberEPDM +Nylon Fabric
12Eye BoltsCarbon Steel1040
13Fixing HolderDuctlie IronGJS 500-7
14Disc HolderDuctlie IronGJS 500-7
15 SedRubberEPDM
16Sedl RetainerDuctile IronGJS 500-7
17 StemStainless SteelAISI 304/316
18PlugStainless SteelAISI 304/316
19 0-rincRubberNBR
20CapDuctlie lronGJS 500-7
21PlugStainless SteelAISI 304/316
22 ScrewStainless SteelA2/A4
23O-ringRubberNBR
24 ScrewStainless SteelA2/A4


Main Valve Globe type Fully bore Flange DN40O-1200SE-AFC-BS-A900-400-1200-10-V1
Shang hai SHUOTE Valve Co,Ltd2022



American Standard


Note:

1. Test:

1.1 Sealing test

Low pressure: 0.5ba;

High pressure:1 1xPN bar;

1.2 Shell test


15xPN bar

2. Flange dimension can be according to order;

3. If need optional material or others consult factory.


Technical Specification

1. Design & Manufacture: BS EN 1074-5

2. Face to Face Standard: BS EN 558-1

3. Range ends Standard: ASME B16.5

4. Test inspection: BS EN 12266-1

Unit:mm

NPSLDNΦDΦKN-ΦdCH
2”23050152120.64-Φ1919177
21/2”29065178139.74-Φ1922.1202
3”31080190152.44-Φ1923.9219
4”350100229190.58-Φ1923.9243
5”400125254215.98-Φ22.523.9243
6”480150279241.38-Φ22.525.4333
8”600200343298.48-Φ22.528.4428
10”73025040636212-Φ2629.9478
12”850300484431.812-Φ2631.7538
14”980350533476.212-Φ28.534.8550


NoPart NameMaterialStandard
1BodyDuctlie lronGJS 500-7
2SeatStainless SteelAlSI 304/316
3O-ringRubberNBR
40-ringRubberNBR
5BoltStainless SteelA2/A4
6WasherStainless SteelA2/A4
7BonnetDuctile lronGJS 500-7
8BushBronzeC61900
9SpringStainless SteelAISI 304/316
10Caulking NutStainless SteelA4
11DiaphragmNylon Reinforced RubberEPDM +Nylon Fabric
12Fixing holderDuctlie lronGJS 500-7
13Disc HolderDuctlie lronGJS 500-7
14SedRubberEPDM
15Seat RefainerStainless SteelAISI 304/316
16StemStainless SteelAISI 304/316
17PlugStainless SteelAISI 304/316
18ScrewStainless SteelA2/A4
19PlugStainless SteelA2/A4
20WasherStainless SteelA2/A4


Main Valve Globe type Fully bore Flange 2~14”SE-SUOTE-BS-S900-2-14-CL150-V1
Shang hai SHUOTE Valve Co.,Ltd.2023.5.16


European standard


Note:


1. Test:

1.1 Sealing test

Low pressure:0.5bar;

High pressure:1.1xPN bar;

1.2 Shell test

1.5xPN bar

2. Flange dimension can be according to order;

3. lf need optional material or others consult factory.



Technical Specification

1. Design & Manufacture: BS EN 1074-5

2. Face to Face Standard: BS EN 558-1

3. Flange ends Standard: IS07005-2

4. Test Inspection: BS EN 12266-1

Unit:mm

DNLHΦDΦKN-ΦdΦBCf
PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25
502301771651651651251251254-Φ194-Φ194-Φ19999999191919333
652902021851851851451451454-Φ194-Φ198-Φ19118118118191919333
803102192002002001601601608-Φ198-の198-Φ19132132132191919333
1003502432202202351801801908-Φ198-Φ198-Φ23156156156191919333
1254002432502502702102102208-Φ198-Φ198-Φ28184184184191919333
1504803332852853002402402508-Φ238-Φ238-Φ28211211211191920333
2006004283403403602952953108-Φ2312-Φ2312-Φ28266266274202022333
25073047839540542535035537012-Φ2312-Φ2812-Φ31319319330222224.5333
30085053844546048540041043012-Φ2312-Φ2816-Φ3137037038924.524.527.5444
35098055050552055546047049016-Φ2316-Φ2816-03442942944824.526.530444


No.Part NameMaterialStandard
1BodyDuctlie lronGJS 500-7
2SeatStainless SteelAISI 304/316
30-rinoRubberNBR
4O-ringRubberNBR
5BoltStainless SteelA2/A4
6WasherStainless SteelA2/A4
7BonnetDuctite lronGJS 500-7
8BushBronzeC61900
9SpringStainless SteelAISI 304/316
10
   IU		Caulking NutStainless SteelA4
11DiaphragmNylon Reinforced RubberFPDM +Nylon Fabric
12Fixing holderDuctlie lronGJS 500-7
13Disc HolderDuctlie lronGJS 500-7
14SealRubberEPDM
15Seat RetainerStainless SteelAlSI 304/316
16StemStainless SteelAlSI 304/316
17PlugStainless SteelAISI 304/316
18ScrewStainless SteelA2/A4
19PlugStainless SteelA2/A4
20WasherStainless SteelA2/A4


Main Valve Globe type Fully bore Flange DN50-350SE-AFC-BS-A900-50-350-10-V1
Shang hai SHUOTE Valve Co,Ltd2022


Technical Specification

1.Design & Manufacture: BS EN 1074-5

2. Fce to Face Standard: BS EN 558-1

3. Flange ends Standard: IS07005-2

4.Test Inspection: BS EN 12266-1


Note:

1. Test:

1.1 Sealing test

Low pressure:0.Sbar;

High pressure:1.1xPN bar;

1.2 Shell test

1.5xPN bar

2. Flange dimension can be according to order;

3. lf need optional material or others consult factory.

Unit:mm

 DN LHΦDΦKN-ΦdΦBCf
PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25PN10PN16PN25
4001100710565 58062051552555016-Φ2816-Φ3116-Φ3748048050324.52832444
4501200720615 64067056558560020-Φ2820-Φ3120-Φ3753054854825.53034.5444
5001250822670 71573062065066020-Φ2820-Φ3420-Φ3758260960926.531.536.5444
600145088578084084572577077020-Φ3120-Φ3720-Φ40682720720303642555
700165091089591096084084087524-Φ3124-Φ3724-04379479482032.539.546.5555
8001850126010151025108595095099024-Φ3424-Φ4024-049901901928354351555
9002050126011151125118510501050109028-Φ3428-Φ4028-Φ4910011001102837.546.555.5555
10002250126012301255132011601170121028-Φ3728-Φ4228-Φ56111211121140405060555
12002350163014551485153013801390142032-Φ4032-Φ4932-Φ56132813281350455769555


NoPart NameMaterialStandard
1 BodyDuctlie lronGJS 500-7
2SeatStainless SteelAISI 304/316
3 ScrewStainless SteelA2/A4
4 ScrewStainless SteelA2/A4
5 ScrewStainless SteelA2/A4
6 SpringStainless SteelAISI 304/316
7 BonnetDuctile IrorGJS 500-7
8 BushBronzeC61900
9 0-rincRubberNBR
10Fix WasherBronzeC61900
11DiaphragmNylon Reinforced RubberEPDM +Nylon Fabric
12Eye BoltsCarbon Steel1040
13Fixing HolderDuctlie IronGJS 500-7
14Disc HolderDuctlie IronGJS 500-7
15 SedRubberEPDM
16Sedl RetainerDuctile IronGJS 500-7
17 StemStainless SteelAISI 304/316
18PlugStainless SteelAISI 304/316
19 0-rincRubberNBR
20CapDuctlie lronGJS 500-7
21PlugStainless SteelAISI 304/316
22 ScrewStainless SteelA2/A4
23O-ringRubberNBR
24 ScrewStainless SteelA2/A4


Main Valve Globe type Fully bore Flange DN40O-1200SE-AFC-BS-A900-400-1200-10-V1
Shang hai SHUOTE Valve Co,Ltd2022


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Recommended

  • Quality Customized Hytrol valve S900-1 | SHSUOTE Valve
    Quality Customized Hytrol valve S900-1 | SHSUOTE Valve
    The shsuoTe  Mode  S900-1 Hytrol valve is a hydraulically perated diaphragm  actuated ,  globe or angle pattern valve. lt  consists of three major components: body diaphragm assembly, and cover. The diaphragm assembly is the only moving part.The diaphragm assembly is guided top and bottom  by a precision machined stem. It utilizes a non-wicking diaphragm of nylon fabric bonded with synthetic rubber. A resilient synthetic rubber disc retained on three and one haIf sides by a disc retainerforms a drip-tight seal with the renewable seat when pressure is applied above the diaphragm.· Drip-Tight, positive seating· Service without Removal From Line· Threaded, Flanged or Grooved Ends· GIobe or Angle pattern· 100% Factory Tested
  • Simple reliable and accurate hytrol valve S900-01(DN600-DN1400) | SHSUOTE Valve
    Simple reliable and accurate hytrol valve S900-01(DN600-DN1400) | SHSUOTE Valve
    The SHSUOTE S900-01 TYTAN valve is a hydraulically operated, diaphragm actuated, globe pattern valve. It consist so three major components body, diaphragm assembly and cover. The diaphragm assembly is the only moving part, guided top and bottom by a precision machined stem .The disc retainer and rubber disc form a drip-tight seal with the renewable seat when pressure is applied above the diaphragm (cover chamber)
  • Anti-cavitation Hytrol Valve S900-01KO (Full internal port)
    Anti-cavitation Hytrol Valve S900-01KO (Full internal port)
    The SHSUOTE model S900-01KO Anti-Cavitation Hytrol Valve is designed for applications where there is a high potential for damage form cavitation. Specify this valve series for a wide variety of control valve applications having pressure differentials up to 300 psid or for relief valves having atmospheric discharge up to 150 psid.The S900-01KO Hytrol valve provides optimum internal pressure control through a unique anti-cavitation trim design. Constructed of 316 stainless steel, the seat and disc guide trim components feature dual interlocked sleeves containing radial slots that deflect internal flow to impinge upon itself in the center of  the flow path, harmlessly dissipating the potential cavitation damage. This unique design also lessens the possibility of fouling if large particles in the water are present duo to the large flow path of the radial slots.Virtually Cavitation Free Operation· Severe Service Design - High Pressure Differentials· Reduced Noise and Vibration· 316 Stainless Steel Disc Guide and Seat Standard· Drip-Tight, Positive Sealing· Service Without Removal From Line· Retrofit to Standard Hytrol Valves
  • Powertrol valve S900-02 | SHSUOTE Valve
    Powertrol valve S900-02 | SHSUOTE Valve
    The SHSUOTE Model S900-02 is a hydraulically operated , diaphragm actuated,  globe ,  or angle pattern vaIve.  lt consists of four major components: body,  intermediate chamber, diaphragm assembly and cover. The diaphragm assembly is the only moving part.The diaphragm assembly which  is guided top and center by a precision  machined stem ,  utilizes a non-wicking diaphragm  of nylon fabric bonded with synthetic rubber. The diaphragm forms a seal between the cover chamber and intermediate chamber. A synthetic rubber disc retained on three and one half sides forms a drip-tight seal with the  renewable seat when  pressure  is applied above the diaphragm. As pressure above the diaphragm is relieved and pressure is applied below the diaphragm, the valve  pens wide for full flow. The rate of closing or opening can be controlled  by modulating flow into or out of the diaphragm chambers.

PRODUCTS

Send your inquiry

Contact Us
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
LEAVE A MESSAGE

With the expansion of the international market, we are inviting more overseas partners to join us. You’re welcome to work with us.

Chat
Now

Send your inquiry

Choose a different language
╳
English
Tiếng Việt
Pilipino
Bahasa Melayu
हिन्दी
Esperanto
русский
日本語
français
Español
Deutsch
العربية
Current language：English