Automatic Control Valve

HOME > PRODUCTS > Automatic Control Valve

Recommended

Replay

Recommended

Quality Customized Hytrol valve S900-1 | SHSUOTE Valve

Customized Hytrol valve S900 | SHSUOTE Valve

Simple reliable and accurate hytrol valve S900-01(DN600-DN1400) | SHSUOTE Valve

Powertrol valve S900-02 | SHSUOTE Valve

Anti-cavitation Hytrol Valve S900-01KO (Full internal port)

The SHSUOTE model S900-01KO Anti-Cavitation Hytrol Valve is designed for applications where there is a high potential for damage form cavitation. Specify this valve series for a wide variety of control valve applications having pressure differentials up to 300 psid or for relief valves having atmospheric discharge up to 150 psid.

The S900-01KO Hytrol valve provides optimum internal pressure control through a unique anti-cavitation trim design. Constructed of 316 stainless steel, the seat and disc guide trim components feature dual interlocked sleeves containing radial slots that deflect internal flow to impinge upon itself in the center of the flow path, harmlessly dissipating the potential cavitation damage. This unique design also lessens the possibility of fouling if large particles in the water are present duo to the large flow path of the radial slots.

Virtually Cavitation Free Operation

· Severe Service Design - High Pressure Differentials

· Reduced Noise and Vibration

· 316 Stainless Steel Disc Guide and Seat Standard

· Drip-Tight, Positive Sealing

· Service Without Removal From Line

· Retrofit to Standard Hytrol Valves

SEND INQUIRY NOW

Product Details

The S900-01 KO hytrol is the basic valve used in SHSUOTE automatic control valves for high differential applications requiring remote control, pressure regulation, solenoid operation, rate of flow control, or liquid level control.

The anti-cavitation trim components can be retrofitted to existing valves if the application indicates an appropriate need. Please consult factory for details.

Full Open Operation

When pressure in the cover chamber is relieved to a zone of lower pressure, the line pressure at the valve inlet opens the valve, allowing full flow.

Tight Closing Operation

When pressure form the valve inlet is applied to the cover chamber, the valve closes drip-tight.

Modulating Action

The valve holds any intermediate position when operating pressures are equal above and below the diaphragm SHSUOTE "Modulating" pilot control will allow the valve to automatically compensate for line pressure changes.

Funtional Data

For assistance in selecting appropriate valve options or valves manufactured with special design requirements, please contact our Regional Sales Office or Factory.

American Standard

Note:

1. Test:

1.1 Sealing test

Low pressure: 0.5ba;

High pressure:1 1xPN bar;

1.2 Shell test

15xPN bar

2. Flange dimension can be according to order;

3. If need optional material or others consult factory.

Technical Specification

1. Design & Manufacture: BS EN 1074-5

2. Face to Face Standard: BS EN 558-1

3. Range ends Standard: ASME B16.5

4. Test inspection: BS EN 12266-1

Unit:mm

NPS	L	DN	ΦD	ΦK	N-Φd	C	H
2”	230	50	152	120.6	4-Φ19	19	177
21/2”	290	65	178	139.7	4-Φ19	22.1	202
3”	310	80	190	152.4	4-Φ19	23.9	219
4”	350	100	229	190.5	8-Φ19	23.9	243
5”	400	125	254	215.9	8-Φ22.5	23.9	243
6”	480	150	279	241.3	8-Φ22.5	25.4	333
8”	600	200	343	298.4	8-Φ22.5	28.4	428
10”	730	250	406	362	12-Φ26	29.9	478
12”	850	300	484	431.8	12-Φ26	31.7	538
14”	980	350	533	476.2	12-Φ28.5	34.8	550

No	Part Name	Material	Standard
1	Body	Ductlie lron	GJS 500-7
2	Seat	Stainless Steel	AlSI 304/316
3	O-ring	Rubber	NBR
4	0-ring	Rubber	NBR
5	Bolt	Stainless Steel	A2/A4
6	Washer	Stainless Steel	A2/A4
7	Bonnet	Ductile lron	GJS 500-7
8	Bush	Bronze	C61900
9	Spring	Stainless Steel	AISI 304/316
10	Caulking Nut	Stainless Steel	A4
11	Diaphragm	Nylon Reinforced Rubber	EPDM +Nylon Fabric
12	Fixing holder	Ductlie lron	GJS 500-7
13	Disc Holder	Ductlie lron	GJS 500-7
14	Sed	Rubber	EPDM
15	Seat Refainer	Stainless Steel	AISI 304/316
16	Stem	Stainless Steel	AISI 304/316
17	Plug	Stainless Steel	AISI 304/316
18	Screw	Stainless Steel	A2/A4
19	Plug	Stainless Steel	A2/A4
20	Washer	Stainless Steel	A2/A4

Main Valve Globe type Fully bore Flange 2~14”	SE-SUOTE-BS-S900-2-14-CL150-V1
Shang hai SHUOTE Valve Co.,Ltd.	2023.5.16

European standard

Note:

1. Test:

1.1 Sealing test

Low pressure:0.5bar;

High pressure:1.1xPN bar;

1.2 Shell test

1.5xPN bar

2. Flange dimension can be according to order;

3. lf need optional material or others consult factory.

Technical Specification

1. Design & Manufacture: BS EN 1074-5

2. Face to Face Standard: BS EN 558-1

3. Flange ends Standard: IS07005-2

4. Test Inspection: BS EN 12266-1

Unit:mm

DN	L	H	ΦD			ΦK			N-Φd			ΦB			C			f
DN	L	H	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25
50	230	177	165	165	165	125	125	125	4-Φ19	4-Φ19	4-Φ19	99	99	99	19	19	19	3	3	3
65	290	202	185	185	185	145	145	145	4-Φ19	4-Φ19	8-Φ19	118	118	118	19	19	19	3	3	3
80	310	219	200	200	200	160	160	160	8-Φ19	8-の19	8-Φ19	132	132	132	19	19	19	3	3	3
100	350	243	220	220	235	180	180	190	8-Φ19	8-Φ19	8-Φ23	156	156	156	19	19	19	3	3	3
125	400	243	250	250	270	210	210	220	8-Φ19	8-Φ19	8-Φ28	184	184	184	19	19	19	3	3	3
150	480	333	285	285	300	240	240	250	8-Φ23	8-Φ23	8-Φ28	211	211	211	19	19	20	3	3	3
200	600	428	340	340	360	295	295	310	8-Φ23	12-Φ23	12-Φ28	266	266	274	20	20	22	3	3	3
250	730	478	395	405	425	350	355	370	12-Φ23	12-Φ28	12-Φ31	319	319	330	22	22	24.5	3	3	3
300	850	538	445	460	485	400	410	430	12-Φ23	12-Φ28	16-Φ31	370	370	389	24.5	24.5	27.5	4	4	4
350	980	550	505	520	555	460	470	490	16-Φ23	16-Φ28	16-034	429	429	448	24.5	26.5	30	4	4	4

No.	Part Name	Material	Standard
1	Body	Ductlie lron	GJS 500-7
2	Seat	Stainless Steel	AISI 304/316
3	0-rino	Rubber	NBR
4	O-ring	Rubber	NBR
5	Bolt	Stainless Steel	A2/A4
6	Washer	Stainless Steel	A2/A4
7	Bonnet	Ductite lron	GJS 500-7
8	Bush	Bronze	C61900
9	Spring	Stainless Steel	AISI 304/316
10	Caulking Nut	Stainless Steel	A4
11	Diaphragm	Nylon Reinforced Rubber	FPDM +Nylon Fabric
12	Fixing holder	Ductlie lron	GJS 500-7
13	Disc Holder	Ductlie lron	GJS 500-7
14	Seal	Rubber	EPDM
15	Seat Retainer	Stainless Steel	AlSI 304/316
16	Stem	Stainless Steel	AlSI 304/316
17	Plug	Stainless Steel	AISI 304/316
18	Screw	Stainless Steel	A2/A4
19	Plug	Stainless Steel	A2/A4
20	Washer	Stainless Steel	A2/A4

Main Valve Globe type Fully bore Flange DN50-350	SE-AFC-BS-A900-50-350-10-V1
Shang hai SHUOTE Valve Co,Ltd	2022

Technical Specification

1.Design & Manufacture: BS EN 1074-5

2. Fce to Face Standard: BS EN 558-1

3. Flange ends Standard: IS07005-2

4.Test Inspection: BS EN 12266-1

Note:

1. Test:

1.1 Sealing test

Low pressure:0.Sbar;

High pressure:1.1xPN bar;

1.2 Shell test

1.5xPN bar

2. Flange dimension can be according to order;

3. lf need optional material or others consult factory.

Unit:mm

DN	L	H	ΦD			ΦK			N-Φd			ΦB			C			f
DN	L	H	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25	PN10	PN16	PN25
400	1100	710	565	580	620	515	525	550	16-Φ28	16-Φ31	16-Φ37	480	480	503	24.5	28	32	4	4	4
450	1200	720	615	640	670	565	585	600	20-Φ28	20-Φ31	20-Φ37	530	548	548	25.5	30	34.5	4	4	4
500	1250	822	670	715	730	620	650	660	20-Φ28	20-Φ34	20-Φ37	582	609	609	26.5	31.5	36.5	4	4	4
600	1450	885	780	840	845	725	770	770	20-Φ31	20-Φ37	20-Φ40	682	720	720	30	36	42	5	5	5
700	1650	910	895	910	960	840	840	875	24-Φ31	24-Φ37	24-043	794	794	820	32.5	39.5	46.5	5	5	5
800	1850	1260	1015	1025	1085	950	950	990	24-Φ34	24-Φ40	24-049	901	901	928	35	43	51	5	5	5
900	2050	1260	1115	1125	1185	1050	1050	1090	28-Φ34	28-Φ40	28-Φ49	1001	1001	1028	37.5	46.5	55.5	5	5	5
1000	2250	1260	1230	1255	1320	1160	1170	1210	28-Φ37	28-Φ42	28-Φ56	1112	1112	1140	40	50	60	5	5	5
1200	2350	1630	1455	1485	1530	1380	1390	1420	32-Φ40	32-Φ49	32-Φ56	1328	1328	1350	45	57	69	5	5	5

No	Part Name	Material	Standard
1	Body	Ductlie lron	GJS 500-7
2	Seat	Stainless Steel	AISI 304/316
3	Screw	Stainless Steel	A2/A4
4	Screw	Stainless Steel	A2/A4
5	Screw	Stainless Steel	A2/A4
6	Spring	Stainless Steel	AISI 304/316
7	Bonnet	Ductile Iror	GJS 500-7
8	Bush	Bronze	C61900
9	0-rinc	Rubber	NBR
10	Fix Washer	Bronze	C61900
11	Diaphragm	Nylon Reinforced Rubber	EPDM +Nylon Fabric
12	Eye Bolts	Carbon Steel	1040
13	Fixing Holder	Ductlie Iron	GJS 500-7
14	Disc Holder	Ductlie Iron	GJS 500-7
15	Sed	Rubber	EPDM
16	Sedl Retainer	Ductile Iron	GJS 500-7
17	Stem	Stainless Steel	AISI 304/316
18	Plug	Stainless Steel	AISI 304/316
19	0-rinc	Rubber	NBR
20	Cap	Ductlie lron	GJS 500-7
21	Plug	Stainless Steel	AISI 304/316
22	Screw	Stainless Steel	A2/A4
23	O-ring	Rubber	NBR
24	Screw	Stainless Steel	A2/A4

Main Valve Globe type Fully bore Flange DN40O-1200	SE-AFC-BS-A900-400-1200-10-V1
Shang hai SHUOTE Valve Co,Ltd	2022

Basic Information

Year Established

--
Business Type

--
Country / Region

--
Main Industry

--
Main Products

--
Enterprise Legal Person

--
Total Employees

--
Annual Output Value

--
Export Market

--
Cooperated Customers

--

Quality Customized Hytrol valve S900-1 | SHSUOTE Valve

The shsuoTe Mode S900-1 Hytrol valve is a hydraulically perated diaphragm actuated , globe or angle pattern valve. lt consists of three major components: body diaphragm assembly, and cover. The diaphragm assembly is the only moving part.The diaphragm assembly is guided top and bottom by a precision machined stem. It utilizes a non-wicking diaphragm of nylon fabric bonded with synthetic rubber. A resilient synthetic rubber disc retained on three and one haIf sides by a disc retainerforms a drip-tight seal with the renewable seat when pressure is applied above the diaphragm.· Drip-Tight, positive seating· Service without Removal From Line· Threaded, Flanged or Grooved Ends· GIobe or Angle pattern· 100% Factory Tested
Customized Hytrol valve S900 | SHSUOTE Valve

S900 Hytrol valve compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.SHSUOTE Valve summarizes the defects of past products, and continuously improves them. The specifications of S900 Hytrol valve can be customized according to your needs.The SHSUOTE model S900 hytrol vaIve is a hydraulically operated, diaphragm actuated, globe or angle pattern vaIve. lt consists of three major components: body, diaphragm assembly, and cover. The diaphragm assembly is the only moving part.The diaphragm assembly is guided top and bottom by a precision machined stem. lt utilizes a non-wicking diaphragm of nylon fabric bonded with synthetic rubber. A resilient synthetic rubber disc retained on three and one half sides by a disc retainerforms a drip-tight seal with the renewable seat when pressure is applied above the diaphragm.· Drip-Tight, positive seating· Service without Removal From Line· Threaded, Flanged or Grooved Ends· GIobe or AngIe pattern· 100% Factory Tested
Simple reliable and accurate hytrol valve S900-01(DN600-DN1400) | SHSUOTE Valve

The SHSUOTE S900-01 TYTAN valve is a hydraulically operated, diaphragm actuated, globe pattern valve. It consist so three major components body, diaphragm assembly and cover. The diaphragm assembly is the only moving part, guided top and bottom by a precision machined stem .The disc retainer and rubber disc form a drip-tight seal with the renewable seat when pressure is applied above the diaphragm (cover chamber)
Powertrol valve S900-02 | SHSUOTE Valve

The SHSUOTE Model S900-02 is a hydraulically operated , diaphragm actuated, globe , or angle pattern vaIve. lt consists of four major components: body, intermediate chamber, diaphragm assembly and cover. The diaphragm assembly is the only moving part.The diaphragm assembly which is guided top and center by a precision machined stem , utilizes a non-wicking diaphragm of nylon fabric bonded with synthetic rubber. The diaphragm forms a seal between the cover chamber and intermediate chamber. A synthetic rubber disc retained on three and one half sides forms a drip-tight seal with the renewable seat when pressure is applied above the diaphragm. As pressure above the diaphragm is relieved and pressure is applied below the diaphragm, the valve pens wide for full flow. The rate of closing or opening can be controlled by modulating flow into or out of the diaphragm chambers.

PRODUCTS

Send your inquiry

*Name
Format error
*E-mail
Format error
*Phone/WhatsApp/Skype
Format error
*Company Name
Format error
*Content
Format error

Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.

LEAVE A MESSAGE

With the expansion of the international market, we are inviting more overseas partners to join us. You’re welcome to work with us.

Name
Format error
E-mail
Format error
Phone/WhatsApp/Skype
Format error
Company Name
Format error
Content
Format error