Our heavy investment in the product R&D has finally paid off. Shanghai Suote Valve Co.,Ltd. has successfully rolled out a new product series, namely Pressure Reducing Control Valve Hydraulic 24volt. It is totally unique in several aspects including its appearance, features, and applications. it is highly acclaimed by the clients for its unique features. SHSUOTE has been dedicated to the design, R&D, manufacturing, and updates of gate valve,Slow closing check valve,Pressure reducing valve,Double eccentric hemispherical valve,Double eccentric butterfly valve,Pipeline Ball Valve,Triple eccentric hard seal butterfly valve. We fully hope that we can satisfy customers from different fields, countries, and regions by offering them high-quality products and professional service. If you have any questions or problems, please contact us at any time through the contact information listed on our website.
Name:Pressure reducing control valve hydraulic 24volt
The remote control float valve is composed of the main valve of the hydraulic control valve and the float switch and piping. The main function is to control the liquid level of the pool or the elevated water tower. The valve is installed at the entrance of the pool or the elevated water tower.
|3||Seat ring||stainless steel||ZG1Cr18Ni9|
|9||Pipe fitting||brass/stainless steel||HPb59-1/0Cr18Ni9|
|10||Pilot pressure reducing valve||brass||HPb59-1|
001.Hydraulic control, no external driving force.
002.The main valve has only one moving part and the failure rate is low.
003.Diaphragm structure, no friction, high control sensitivity.
004.The pressure behind the valve does not change with the change of the pressure in front of the valve.
005.The pressure behind the valve does not change with the change of system flow;
006.Good static pressure reduction effect;
007.Wide range of pressure regulation after valve;
1. *DN 125/350 use same internal as DN100/300
2. AISI 304 factory standard material, consult factory for AISI 316 material
|Design standard||CJ/T219, JB/T10674|
|Face spacing standard||GB/T12221|
|Inspection testing standard||GB/T13927|07.Operating principle
|Nominal diameter||DN50~DN600(2"~24") PN10|
The adjustable pressure-reducing valve is a pilot pressure-reducing valve, which is composed of the main valve of the hydraulic control valve and the pressure-reducing pilot valve.The main valve outlet pressure change through the pilot valve amplification control of the main valve disc action;The work of the reduced pressure pilot valve is based on the balance between the force exerted by the spring downward to open the disc and the force exerted by the diaphragm upward to close the disc.When water is used at the back end of the main valve, the pressure of the guide valve spring is greater than the pressure acting on the lower end of the dowm.Guide valve open, the main valve cavity drain to the outside, the main valve open;When water is not used at the back end of the main valve, the back end pressure increases.Push the guide valve diaphragm upward to close the guide valve, thus closing the main valve and stabilizing the pressure at the back end at the set value;The water consumption of the back end of the main valve is different, so that the water pressure acting on the lower end of the diaphragm of the pilot valve is different.The opening of the pilot valve changes accordingly.In order to control the size of the main valve opening, so that the pressure at the back end is always kept at the set value;The pressure value set at the back of the valve can be adjusted by the adjusting screw on the pressure relief guide valve.
Q1.How about your delivery time?
A. Commonly, it is 5-10 days if in enough stock. It will takes about 20-30 days after receiving the deposit, the delivery time depends on the items and the order quantity.
Q2: Are you trading company or manufacturer ?
A: We are a manufacturer of hydraulic control valve,gate valve,butterfly valve,check valve,pressure reducing valve and other valve parts for Water plant, secondary water supply, municipal pipe network, reservoir, garbage treatment plant, subway and other industries in municipal engineering;Petrochemical, steel plant, power plant, shipbuilding and paper-making, bio-pharmaceutical, etc
Q3: Can you produce according to our own drawings?
A: Yes, please send your own drawing draft to us.OEM items are welcome.
Q4: Do you provide samples ? is it free or extra ?
A: Yes, we'd like to offer the sample for free charge but the freight will be on your charge.
Q5: Do you have agent or representative abroad?
A: We don't have any agents abroad up to now. If you have interests to join us as agent and enjoy more discounts.Just feel free to contact us then we can discuss more details.
Q6: Can we print the LOGO on products?
A: Yes, the OEM is available with the permission of our customers.
Q7. what is your payment term?
A: T/T or L/C,if you want any other way,please contact us.
Q8: what is your main market?
A:Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, North America, South America, and so on.
Q9: If products have some quality problem, how will you deal with?
A: We will be responsible for all the quality problems.
Q10: What can I get from cooperating with SUOTE VALVE?
A: 1. Special valves, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy.
More info pls just feel free to contact:
Stephen Sun|Sales Manager
Shanghai Suote Valve Co.,Ltd.
Add:No. 369,Maoting Road,Chendun Town,Songjiang District,Shanghai.
Tel:+86 21 57711803 Fax:+86 21 57877055
Country / Region
Enterprise Legal Person
Annual Output Value