VR
  • Products Details

We brought forth range of premium quality range of gate valve,Slow closing check valve,Pressure reducing valve,Double eccentric hemispherical valve,Double eccentric butterfly valve,Pipeline Ball Valve,Triple eccentric hard seal butterfly valve which we supply and trade. After years of special research and development, the products developed successfully break through the bottleneck of the pain points. Shanghai Suote Valve Co.,Ltd. with high quality and good reputation, it has won a good reputation in the industry.


Product Description

1.Products details
Name:Surge anticipating hydraulic control valve for pc30

Surge Anticipating DN25 Hydraulic Control Valve

01.Description
Surge Anticipating Valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When a power failure take place, the abrupt stopping the pump can cause dangerous surges in the system which could result in severe equipment damage. Power failure to a pump will usually result in a down surge in pressure, followed by an up surge in pressure. The surge control valve opens on the initial low pressure wave, diverting the returning high pressure wave from the system. In effect, the valve has anticipated the returning high pressure wave and is open to dissipate the damage causing surge. The valve will then close slowly without generating any shock.
02.Main parts&material
No.PartMaterialChina stardard
1bodyDuctile ironEN-JS1040
2Seat ringStainless steelAISI 304
3O-ringRubberNBR
4O-ringRubberNBR
5Screw boltStainless steelA2
6GasketStainless steelA2
7bonnetDuctile ironEN-JS1040
8Shaft SleeveLead BrassCZ 122
9SpringStainless steelAISI 304
10NutStainless steelA2
11DiaphragmRubberNBR
12Diaphragm pressure plateDuctile ironEN-JS1040
13Hinge PinStainless steelAISI 304
14YokeDuctile ironEN-JS1040
15Seal RingRubberNBR
16Guide plateStainless steelAISI 304
17StemStainless steelAISI 304
I8PlugStainless steelAISI 304

03.Features
001.The diaphragm assembly provides long life and reliability with a stem guided by both top and seat rings.
002.All cast iron parts are coated with split epoxy resin to resist corrosion.
003.During maintenance, the main valve does not need to be removed from the pipeline and can be repaired directly on line.
004.The alignment of valve body allows for better control characteristics and lower head loss.
005.Ductile iron body has high strength and light weight.
006.Reinforced nylon diaphragm, film thickness uniform high strength, good precision, durable.
007.Internal use of stainless steel seat, guide platen and shaft, durable.
008.Good closing effect, zero leakage safety.
009.Hydraulic operation does not need external power, can cooperate with the need to match different guide valves and accessories as opening and closing or adjust the water level, pressure and flow.

04.Dimensions
DN LBHDPN10PN16PN25N.W. kg
5023017323285 4-019 14
65290197259954-0194-0198-01919
803102242791028-0198-0198-01923
1003502653051208-0198-0198-02332
1504803524451528-0238-0238-02868
2006004365691828-02312-02312-028112
25073051861121212-02312-02812-031178
30085060065924212-02312-02816-031225
DNLØDØK  HN-Ød
PN10PN16PN25PN10PN16PN25PN10PN16PN25
400110056558062051552555081316-02816-03116-037
450110061564067056558560081320-02820-03120-037
5CO125067071573062065066096720-02820-03420-037
6CO1450780840845725770770114020-03120-03720-040
7001450895910960840840875114024-03124-03724-043

05.Execution standard
Design standardCJ/T219, JB/T10674
Connection standardGB/T17241.6
Face spacing standardGB/T12221
Inspection testing standardGB/T13927

06.Technical parameters
Nominal diameterDN50~DN600(2"~24") PN10
DN50~DN600(2"~24") PN16
DN50~DN200(2"~8") PN25
Nominal pressure0.1MPa-0.8MPa
0.8MPa-1.3MPa
1.3MPa-2.0MPa
Operating temperature-10°C~85°C
Seal test1.1PN
Shell test1.5PN
Suitable mediumWater

07.Operating principle
Fluctuations when the pipeline pressure in normal circumstances, sampling valve tube after Y type filter to wave the upper valve diaphragm, a buffer holes due to the lower part of the diaphragm valve and valve body are interlinked, diaphragm valve at this time due to the fluctuation of pressure equal to there is no pressure difference and fluctuation valve close on lower part of the diaphragm spring force, when the sudden rise in pressure in pipe, rises high, lower part of high pressure pilot valve diaphragm pressure lifts suddenly, when the pressure rises to more than low pressure pilot valve spring pressure, high pressure pilot valve to open, will wave valve diaphragm upper water leakage, pressure fluctuation after the upper valve diaphragm pressure relief to the diaphragm valve spring force to overcome fluctuations, fluctuation valve open, high pressure pilot valve opens,Pressure water relief into the low-pressure guide valve, the low-pressure guide valve due to the spring force will open the low-pressure guide valve, further drain the pressure fluctuation valve diaphragm on the cavity of the water, so that the pressure fluctuation valve as soon as possible to open.When the water pressure in the pipeline falls, the water in the lower part of the high-pressure guide valve diaphragm is not enough to overcome the spring force on the low-pressure guide valve, the high-pressure guide valve closes, the low-pressure guide valve also closes, at this time the upper part of the fluctuation valve diaphragm is full of water, there is no pressure difference on the lower part of the fluctuation valve diaphragm, the fluctuation valve closes the fluctuation valve by the action of the spring force.Since the lower chamber is connected to the pressure in the valve body through a fixed hole, the closing of the valve is cushioned.

2.Factory tour
Surge Anticipating DN25 Hydraulic Control Valve
Surge Anticipating DN25 Hydraulic Control Valve
Surge Anticipating DN25 Hydraulic Control Valve
Surge Anticipating DN25 Hydraulic Control Valve
Surge Anticipating DN25 Hydraulic Control Valve


3.FAQ


Q1.How about your delivery time?
A. Commonly, it is 5-10 days if in enough stock. It will takes about 20-30 days after receiving the deposit, the delivery time depends on the items and the order quantity.

Q2: Are you trading company or manufacturer ?
A: We are a manufacturer of hydraulic control valve,gate valve,butterfly valve,check valve,pressure reducing valve and other valve parts for Water plant, secondary water supply, municipal pipe network, reservoir, garbage treatment plant, subway and other industries in municipal engineering;Petrochemical, steel plant, power plant, shipbuilding and paper-making, bio-pharmaceutical, etc

Q3: Can you produce according to our own drawings?
A: Yes, please send your own drawing draft to us.OEM items are welcome.
 
Q4: Do you provide samples ? is it free or extra ?
A: Yes, we'd like to offer the sample for free charge but the freight will be on your charge. 

Q5: Do you have agent or representative abroad?
 A: We don't have any agents abroad up to now. If you have interests to join us as agent and enjoy more discounts.Just feel free to contact us then we can discuss more details.
 
Q6: Can we print the LOGO on products?
A: Yes, the OEM is available with the permission of our customers.
 
Q7. what is your payment term?  
A: T/T or L/C,if you want any other way,please contact us.
 
Q8: what is your main market?
A:Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe,  North America, South America, and so on.
 
Q9: If products have some quality problem, how will you deal with?
A: We will be responsible for all the quality problems.
 
Q10: What can I get from cooperating with SUOTE VALVE?
A:  1. Special valves, with customized service.
     2. Timely production and delivery, time is money. 
     3. Market protection service, long term business strategy. 

More info pls just feel free to contact:
Stephen Sun|Sales Manager
Shanghai Suote Valve Co.,Ltd.
Add:No. 369,Maoting Road,Chendun Town,Songjiang District,Shanghai.
Tel:+86 21 57711803  Fax:+86 21 57877055
 
 
suotevalve.en.made-in-china.com

 
Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Contact Us
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
LEAVE A MESSAGE

With the expansion of the international market, we are inviting more overseas partners to join us. You’re welcome to work with us.

Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.

Send your inquiry

Choose a different language
English English Tiếng Việt Tiếng Việt Pilipino Pilipino Bahasa Melayu Bahasa Melayu हिन्दी हिन्दी Esperanto Esperanto русский русский 日本語 日本語 français français Español Español Deutsch Deutsch العربية العربية
Current language:English
Send Your Inquiry