flange pressure reducing valve01.DescriptionPressure Reducing Valve automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. The valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.02.Main parts&material
|3||Seat ring||Stainless steel||ZG1Cr18Ni9|
|10||Float switch||Stainless steel||0Cr18Ni9|
001.Stem diaphragm assembly with double lead action through top and seat rings provides long life and reliability.
002.All cast iron parts are coated with powder epoxy resin to resist corrosion.
003.During maintenance, the main valve can be repaired directly on line without disconnecting from the pipeline.
004.The linear flow of valve body is convenient to obtain better control characteristics and lower head loss.
005.High strength and light weight of ball iron valve body.
006.Reinforced nylon membrane, die layer thickness uniform strength, good precision, durable.
007.Internal use of stainless steel seat, guide platen and shaft, durable.
008.Good closing effect and zero leakage safety.
009.Hydraulic operation does not need external power, can be matched with the need to match different guide valves and accessories as opening and closing or adjust the water level, pressure and flow.
001.When the water level of the pool reaches full.The main valve is closed by means of a control ball valve.
002.When the water level of the pool decreases, the control ball valve begins to fill, then the main valve is opened through the control ball valve.
003.Control the ball according to the requirements of the site, directly put the whole set of valve devices together, directly open and close the main valve or separately install the control ball valve at the full water level to achieve the purpose of remote control.04.Dimensions
1.*DN 125/350 use same internal as DN100/300
2.AISI 304 factory standard material, consult factory for AISI 316 material
|Design standard||CJ/T219, JB/T10674|
|Flange connection standard||GB/T17241.6|
|Face spacing standard||GB/T12221|
|Inspection testing standard||GB/T13927|07.Operating principle
|Nominal diameter||DN50~DN600 (2"~24")|
The remote control float valve has the hydraulic control main valve and the float ball switch composition, installs in the pool or the overhead water tower entrance place.When the liquid level of the pool or the elevated water tower reaches the set height, the float switch is in the closed position to close the main valve and stop the water supply to the pool or the elevated water tower;When the liquid level in the pool or the elevated water tower decreases, the float switch opens and the main valve opens one after another to fill the pool or the elevated water tower and realize automatic water replenishment.Precise liquid level control, free from water pressure interference;08.Applications
Water plant, secondary water supply, municipal pipe network, reservoir, garbage treatment plant, subway and other industries in municipal engineering;Petrochemical, steel plant, power plant, shipbuilding and papermaking, biopharmaceutical, etc.2.Factory tour
3.FAQQ1.How about your delivery time?
A. Commonly, it is 5-10 days if in enough stock. It will takes about 20-30 days after receiving the deposit, the delivery time depends on the items and the order quantity.
Q2: Are you trading company or manufacturer ?
A: We are a manufacturer of hydraulic control valve,gate valve,butterfly valve,check valve,pressure reducing valve and other valve parts for Water plant, secondary water supply, municipal pipe network, reservoir, garbage treatment plant, subway and other industries in municipal engineering;Petrochemical, steel plant, power plant, shipbuilding and paper-making, bio-pharmaceutical, etc
Q3: Can you produce according to our own drawings?
A: Yes, please send your own drawing draft to us.OEM items are welcome.
Q4: Do you provide samples ? is it free or extra ?
A: Yes, we'd like to offer the sample for free charge but the freight will be on your charge.
Q5: Do you have agent or representative abroad?
A: We don't have any agents abroad up to now. If you have interests to join us as agent and enjoy more discounts.Just feel free to contact us then we can discuss more details.
Q6: Can we print the LOGO on products?
A: Yes, the OEM is available with the permission of our customers.
Q7. what is your payment term?
A: T/T or L/C,if you want any other way,please contact us.
Q8: what is your main market?
A:Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, North America, South America, and so on.
Q9: If products have some quality problem, how will you deal with?
A: We will be responsible for all the quality problems.
Q10: What can I get from cooperating with SUOTE VALVE?
A: 1. Special valves, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy.
More info pls just feel free to contact:
Shanghai Suote Valve Co., Ltd.