Our employees are skilled at utilizing state-of-the-art technologies.In the application field(s) of Control Valve, Pressure Gauge Pressure Relief Control Valve is widely used and highly recognized by users. Our company has been investing heavily in R&D and upgrades of technologies. This has given initial results eventually. As Pressure Gauge Pressure Relief Control Valve advantages are discovered continually, it has been widely used in the field(s) of Control Valve. Shanghai Suote Valve Co.,Ltd. with high quality and good reputation, it has won a good reputation in the industry.
Pressure relief valve is composed of hydraulic control valve main valve and pressure relief guide valve. It is a commonly used pressure control valve to control the opening and closing of main valve through the opening and closing of guide valve.The valve is suitable for the water supply network or building water supply system to relieve pressure, so that the system pressure is not higher than the valve set pressure value, to ensure the safety of the system pipeline or to maintain the minimum water supply pressure of the pipeline in front of the valve.
|3||Seat ring||stainless steel||ZG1Cr18Ni9|
|9||Pipe fitting||brass/stainless steel||HPb59-1/0Cr18Ni9|
|10||Pilot Relief Valve||brass||HPb59-1|
001.Hydraulic control, no external driving force.
002.The main valve has only one moving part and the failure rate is low.
003.Diaphragm structure, no friction, high control sensitivity.
004.The pressure behind the valve does not change with the change of the pressure in front of the valve.
005.The pressure behind the valve does not change with the change of system flow;
006.Good static pressure reduction effect;
007.Wide range of pressure regulation after valve;
1. *DN 125/350 use same internal as DN100/300
2. AISI 304 factory standard material, consult factory for AISI 316 material
|Design standard||CJ/T219, JB/T10674|
|Face spacing standard||GB/T12221|
|Inspection testing standard||GB/T13927|07.Operating principle
|Nominal diameter||DN50~DN250(2"~10") PN10|
The relief/holding valve is composed of the hydraulic control valve main valve and relief guide valve, controlling the opening and closing of the main valve through the opening and closing of the guide valve.
The relief guide valve is connected to the front end of the main valve through a copper pipe to sense the pressure in the front end.When the pressure at the front end is greater than the set pressure value of the valve, the pressure relief guide valve is opened and the upper chamber of the main valve is drained outward to open the pressure relief valve.When the pressure at the front end is less than the set pressure value of the valve, the pressure relief guide valve will be closed and the upper chamber of the main valve will stop draining water to the outside, so that the main valve will gradually close and achieve zero leakage.The valve setting pressure value can be adjusted through the adjusting screw on the relief guide valve.
Q1.How about your delivery time?
A. Commonly, it is 5-10 days if in enough stock. It will takes about 20-30 days after receiving the deposit, the delivery time depends on the items and the order quantity.
Q2: Are you trading company or manufacturer ?
A: We are a manufacturer of hydraulic control valve,gate valve,butterfly valve,check valve,pressure reducing valve and other valve parts for Water plant, secondary water supply, municipal pipe network, reservoir, garbage treatment plant, subway and other industries in municipal engineering;Petrochemical, steel plant, power plant, shipbuilding and paper-making, bio-pharmaceutical, etc
Q3: Can you produce according to our own drawings?
A: Yes, please send your own drawing draft to us.OEM items are welcome.
Q4: Do you provide samples ? is it free or extra ?
A: Yes, we'd like to offer the sample for free charge but the freight will be on your charge.
Q5: Do you have agent or representative abroad?
A: We don't have any agents abroad up to now. If you have interests to join us as agent and enjoy more discounts.Just feel free to contact us then we can discuss more details.
Q6: Can we print the LOGO on products?
A: Yes, the OEM is available with the permission of our customers.
Q7. what is your payment term?
A: T/T or L/C,if you want any other way,please contact us.
Q8: what is your main market?
A:Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, North America, South America, and so on.
Q9: If products have some quality problem, how will you deal with?
A: We will be responsible for all the quality problems.
Q10: What can I get from cooperating with SUOTE VALVE?
A: 1. Special valves, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy.
More info pls just feel free to contact:
Stephen Sun|Sales Manager
Shanghai Suote Valve Co.,Ltd.
Add:No. 369,Maoting Road,Chendun Town,Songjiang District,Shanghai.
Tel:+86 21 57711803 Fax:+86 21 57877055
Country / Region
Enterprise Legal Person
Annual Output Value